Термоэластопласты Elastron TEP, TPV, SEBS фармокопейного, пищевого, промышленного назначения

 

Elastron P.G101.A45.N

(Old code: 433.001.A45.GEF.PU)

 

Color   Natural Certifications RoHS Processing Method Extrusion Injection Available Standarts ASTM

  

 

 

 

 

Property Unit Standart Value Hardness SHORE A ASTM D 2240 45 Density g/cm³ ASTM D 792 1,17 Tensile Strength at Break MPa ASTM D 412 4,0 1,1 2,1 800 Mod.of Elasticity %100 MPa Mod.of Elasticity %300 MPa Elongation at break % Compression Set % @ 23°C 22 h % @ 70°C 22 h % @ 100°C 22 h ASTM D 395 14 48 65   Tear Resistance N/mm ASTM D 624 22           Ageing Tests     Ozone Resistance Stressed ASTM D 518 No Cracks   Bondable to

                                                 PP, EVA, PE

Injection Molding Paramaters

Molding Temperatures   Rear   Center   Front   Nozzle   Mold   Predrying

Temperature (°C)  145 -175 155 -185 160 -190 175 -205 25-50 Not Necessary

 

Molding Temperatures Temperature (°C)   Feed 150 -170   Rear 155 -175   Center 165 -185   Front 175 -205   Head 180 -210   Die 190 -210   Predrying Not Necessary

Extrusion Molding Paramaters

 

 

 

 

Longitidunal Shrinkage Cross Shrinkage

Value (%) 2,18 2,16

Test Standard ASTM D955 ASTM D955

 

Elastron Kimya A.S.

elastron@elastron.com

www.elastron.com

 

Material Safety Data Sheet according to 1907/2006/EC, Article 31

Page 1/4

Gebze Organize San. Bol. (GOSB)         T 0 262 642 9973
TembeLova ALani 3300 Sokak No: 3322       0 262 643 0001
Gebze Kocaeli TURKEY                         F 0 262 642 9992

 

THERMOPLASTIC ELASTOMERS

elastron

 

Printing date 11.11.2011

Revision: 10.11.2011

1 Identification of the substance/preparation and of the company/undertaking

Product details

Soft, usually matt SBS based thermoplastic Elastomer (TPE) pellets with none or very slight smell

Trade name: ELASTRON D PHARMA

Article number: ELASTRON D 152, 256, 271, 279, 310, 347 series

Application of the substance / the preparation SBS based thermoplastic elastomer

Manufacturer/Supplier:

Elastron Kimya San. ve Tic. A.S. Gebze Organize Sanayi Bolgesi Tembelova Alani 3300 Sokak No:3322 Gebze Kocaeli Turkey

Further information obtainable from:

Mr.Serif Erdogan & Mrs. Dilek Sipahi Elastron Kimya

R & D Department

Information in case of emergency: +90 262 643 0001 Mr.Serif Erdogan

2 Hazards identification

Information concerning particular hazards for human and environment:

The product does not have to be labelled due to the calculation procedure of the «General Classification guideline for preparations of the EU» in the latest valid version. No hazards to be particularly mentioned. Please note the information of this Material Safety Data Sheet. This material is not expected to produce any significant adverse health or environmental effect when recommended use instructions are followed.

Classification system:

The classification is according to the latest editions of the EU-lists, and extended by company and literature data.

3 Composition/information on ingredients

Chemical characterization Description:

SBS based thermoplastic elastomer (TPE) compound containing praffinic oil, polyolefins, antioxidants,pigments.

Dangerous components: Void

Additional information: For the wording of the listed risk phrases refer to section 16.

4 First aid measures

General information:

Pellets: Handle pellets using good industrial hygene practices, including avoiding unnecessary exposure to skin, clothing and eyes.

After inhalation:

(Contd. on page 2)

GB

Printing date 11.11.2011                                                                                                                      Revision: 10.11.2011

Trade name: ELASTRON D PHARMA

 

(Contd. of page 1)

Caution! Processing, releases vapours or fumes containing aliphatic and possibly aromatic hydrocarbons, which may cause respiratory tract irritation. Avoid breathing these fumes and vapours. Process materials using adequate ventilation.

• After skin contact: Generally the product does not irritate the skin. Wash with soap and water
• After eye contact: Wear safety spectacles. Burns to be treated with standard first aid practice.
• After swallowing:

Practically non-harmful. First Aid not normally required. If symptoms persist consult doctor.

5 Fire-fighting measures

• Suitable extinguishing agents:

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

• Protective equipment: No special measures required.

6 Accidental release measures

• Person-related safety precautions: Spilled pellets may present a slip hazard.
• Measures for environmental protection: Recycle
• Measures for cleaning/collecting: Sweep up into a container, for recycle or disposal.
• Additional information: No dangerous substances are released.

7 Handling and storage

• Handling:
• Information for safe handling:

No special precautions other than the good industrial hygiene practices employed with any industrial chemical.

• Storage:
• Requirements to be met by storerooms and receptacles:

Good storage stability, but avoid extremes of temperatures and humidty in order to minimize compaction of soft grades. Excessive weight may also induce compaction.

• Information about storage in one common storage facility: Store in cool and dry place.
• Further information about storage conditions: None

8 Exposure controls/personal protection

• Ingredients with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.

• Personal protective equipment:
• General protective and hygienic measures:

The usual precautionary measures are to be adhered to when handling chemicals.

• Respiratory protection:

Provide ventilation above processing equipment , to remove any hydrocarbon vapours and dust. avoid breathing in process fumes, since they may cause irritiation to the respiratory tract. During Processing: Fumes can be slightly irritating to eyes and respiratory tract if no ventilation is provided. Safety spectacles and heat resistant gloves are recommended since process temperatures are up to and around 200C.

• Protection of hands:
• Material of gloves

(Contd. on page 3)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- GB

 

 

 

Printing date 11.11.2011

 

Revision: 10.11.2011

 

Trade name: ELASTRON D PHARMA

 

(Contd. of page 2)

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application.

Penetration time of glove material N / A

9 Physical and chemical properties

 

• General Information
Form: Colour: Odour:	Pellets According to product specification Slight smell of rubber.
• Change in condition Melting point/Melting range: 160-200° C Boiling point/Boiling range: N / A
• Flash point:	Open cup : 340C
• Ignition temperature:	250C
• Self-igniting:	Product is not selfigniting.
• Danger of explosion:	Product does not present an explosion hazard.
• Density:	Approx. between 1.05 ― 1.14 g/cm3
• Solubility in / Miscibility with water:	Insoluble.
• Solvent content: Organic solvents:	0.0 %

10 Stability and reactivity

Thermal decomposition / conditions to be avoided:

Product is stable. Follow normal industrial practices.

Materials to be avoided:

Thermoplastic styrenic elastomer can react with PVC and with acetal resins at 160°C or above. Mechanical cleaning and/or cleaning with proprietary claening masterbatch is needed when thermoplastic olefin rubber is sequentially processed with either PVC or acetal resin.

Dangerous decomposition products: None

11 Toxicological information

Acute toxicity:

Primary irritant effect:

on the skin: No irritant effect.

on the eye: No irritating effect.

Sensitization: No sensitizing effects known.

Additional toxicological information:

The product is not subject to classification according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version.

When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.

GB

(Contd. on page 4)

 

Printing date 11.11.2011                                                           Revision: 10.11.2011

Trade name: ELASTRON D PHARMA

(Contd. of page 3)

12 Ecological information

• Information about elimination (persistence and degradability):

Assesment : Not classified as harmful. Biodegras slowly, therefore spills should be swept up into containers for re-use or disposal.

13 Disposal considerations

• Product:
• Recommendation

Alternatively , burn small quantities in an approved incenerator, charging carefully. Landfill is an option, with negligible potential problems due to long term leaching. Care should be taken to ensure compliance with EC, national and local regulations.

• Uncleaned packaging:
• Recommendation: Recycle if possible.

 

	14 Transport information
	•   Land transport ADR/RID (cross-border) •   ADR/RID class: -
	•   Maritime transport IMDG: •   IMDG Class: - •   Marine pollutant: No
	•   Air transport ICAO-TI and IATA-DGR: •   ICAO/IATA Class: -

15 Regulatory information

• Labelling according to EU guidelines:

Observe the general safety regulations when handling chemicals.

The product is not subject to identification regulations under EU Directives and the Ordinance on Hazardous Materials (German GefStoffV).

• Special labelling of certain preparations:

Safety data sheet available for professional user on request.

16 Other information

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

• Department issuing MSDS: Product safety department.
• Contact: Mr.Serif Erdogan +90 262 643 0001
• * Data compared to the previous version altered. reason for issue: revised address information